Products: Ironworkers: SHARK

Also new in the Kingsland series is the SHARK model. This 50T ironworker has 4 working stations: punching, shearing, angle cutting and notching. The blade of the shear has a short section to crop round or square bar. Reversing this short piece of blade increases blade lenght.

All holddowns are Urethane, so there is no need to adjust the holddowns. The ram can be jogged down with a joystick on both ends of the machine.

Specifications & Standards:

	Shark 50 Ton
Punching
Max. Punching Capacity	13/16" hole in 3/4" steel
Stroke Length	4-1/4"
Standard throat	8"
Largest Hole (optional)	4-3/8" hole in 1/8" steel
Cycles/min. - 1/2" travel	60
Working Height	37-3/4"
Shearing
Flat bar, max. thickness	10" x 3/4"
Flat bar, max. width	14" x 5/8""
Flat Bar with fixed hold down	4" x 1"
Angle Cutting
90 deg. cutting	5" x 5" x 3/8"
45 deg. mitre cutting	2-3/4" x 1/4"
working height	38-1/2"
Section Cutting
round/square	1/4" to 1-1/2" dia (min/max)
	1" dia. blade fitted as standard
square bar	1/2" to 1" sq. (min/max)
Notching
Material thickness	1/4"
width	2-3/4""
depth	4"
depth - vee	2-3/8"
working height	42-1/4"
Specifications
Motor	10 HP
Nett. Weight	2,650 lbs
Machine Dims. (LxWxH)	65" x 28" x 60"