Products: Notchers: COMBI

The HACO COMBI notcher combines a notching machine with a forming & punching machine. We took the HACO VARI and built an extra working station at the back to bend sheet metal or to punch holes with a punch unit. We even integrated a mini manual back stop in the extra station.

Capacity is 0.236" (6mm) mild steel. The COMBI has a blade length of 8.6", variable angle between 30 and 140 degrees, several adjustable stops and comes standard with a second set of blades .

Corner notch at the front of the machine and do some rectangular notching at the back of the machine with the optional notching station. The rectangular notching unit can be very quickly attached in this station. 2 adjustments knobs can adjust pressure and speed of this station.

Utilize the COMBI notcher for bending with the gooseneck punch and multi-V bottom die. The bending depth can be adjusted with a adjustable knob on top of the machine. A mechanical display shows the depth. Bending speed can be adjusted at the back of the machine by increasing or decreasing the oil flow to the cylinder.

Punch round holes, squares, rectangular or oblong shapes with the punching unit. Unipunch tooling can be adapted to the COMBI notcher as well.