HACO ATLANTIC North America
11629 N. Houston Rosslyn Road
Houston, TX 77086
40 Holtby Avenue, Unit 7,
Brampton, Ontario, L6X 2M1
F (905) 595-5190
Guillotine shears have several advantages above swing-beam type shears. They are made to cut several material types and thicknesses.
All TS guillotines are standard fitted with the new SP9 control, conveniently located at the left hand side of the machine, within the immediate reach of the operator.
Quick manual blade gap
The quick manual blade gap adjustment is located at the front of the machine on 6mm models, or at the rear of the machine for 12mm models. Blade gap adjustment ranges from 0,05mm for very light sheet thickness and progressively increases up to the maximum blade gap required for heavier shear capacities.
The rake angle is electro-hydraulic driven and controlled from the operator pane. The angle adjustment moves between 0.5° for thin sheets and 3° for thicker sheets.
The right pressure setting
The sheet hold-downs on the TS guillotine models are hydraulic controlled and use a separate hydraulic circuit with separate pump. A pressure activated switch is used for the right pressure setting.
Table blocks: advantages
TS guillotines have table blocks on all models instead of solid tables. The table blocks have several advantages:
We offer blocks with ball transfers as an option on all machines