PLUS-LM 3015 / 4020

PLUS-LM specifically designed for cutting metal (working area: 3050x1550 and 4050x2050 mm).

The two models can be integrated with a fully automatic pallet exchanger to avoid expensive waste of time during the material%u2019s loading/unloading phases . The installed powers are 2200 - 3500 - 5000 and 6000W for CO2 lasers.

The linear motor motion allows extremely high dynamic (< 2,5 G), thus allowing high productivity even on very complex geometries.
High performance, high structural rigidity and high efficiency are combined in the PLUS-LM systems.

For specific applications the systems can also integrate high brilliance IPG fiber laser of 1000, 2000 and 3000W.

PLUS - H 3015 / 4020 / 6020

PLUS-H specifically designed for cutting metal, with the well consolidated technology of rack and pinion (working area 3050x1550, 4050x2050 and 6050x2050 mm ).

All three models can be integrated with a fully automatic pallet exchanger to avoid expensive waste of time during the materials loading /unloading phases. The installed powers are 2200 - 3500 - 5000 and 6000W for CO2 laser.

The PLUS-H systems are a very good compromise combining excellent performance and a very competitive price.

For specific applications the system can also integrate high brilliance IPG fiber laser of 1000, 2000 and 3000W.

LT 1513

The LT 1513 (working area 1500x1250 mm) is proposed as the entry-level system of the laser products range .
Extremely compact this laser cutting system has been designed and implemented aiming at an excellent price/performance relation and at high reliability.
This new system is intended to meet the requirements of small companies which are eager to grow, as well as of large enterprises that plan to invest in a system dedicated to sample making and production of small lots , by encouraging high flexibility and quick response to market needs.
Its design provides a fixed working table and a pressurized beam path protected by bellows. The beam path can also integrate a beam depolarization device.
The dynamics of this system is excellent, allowing very good cutting performance also for complex geometries.
The motion is realized by ball screws, since alternatives, such as belts and similar devices, can%u2019t be considered for use in real industrial systems.
The system can integrate the new CO2 Laser RF333, RF555, RF777 (350W, 550W, 750W). Furthermore you can also integrate an high brilliance IPG fiber laser, with 450W continuous power. The focusing head with a capacitive sensor allows to use 5" or 7.5" focusing lenses with CO2 laser sources and 125mm or 200mm focusing lenses with fiber lasers.